SureTrack Real Fix: Transmission Faults
Real Fixes from Mitchell 1’s SureTrack® expert information resource are documented issues from actual shop repair orders and community discussions. Read on to see how SureTrack can help you correct issues that are not easily diagnosed using OEM information alone. SureTrack is available at no additional cost in our ProDemand product.
When your customer brings their car in with the check engine light on, one of the last things they want to hear is that they have transmission faults. Follow this Real Fix to see how codes P0720, P0731, P0732 and P1790 on this 2002 Chrysler Voyager were diagnosed and the component that caused the problem.
2002 Chrysler Voyager 3.3L
P0720, P0731, P0732, P1790, Replaced Automatic Transmission Control Module
The customer states the check engine light is on.
Connected a scan tool and found codes: P0720 – Output Speed Sensor Circuit; P0731 – Gear 1 Incorrect Ratio and P0732 – Gear 2 Incorrect Ratio and P1790 – Fault Immediatly After Shift. Performed a road test while monitoring live scan tool data and observed the tranmission output shaft speed sensor parameter was not present. With the ignition on and the engine off, used a multi-meter to check for the presence of voltage and ground at the transmission output shaft speed sensor connector and found voltage was not present. Inspected the transmission output shaft speed sensor wiring harness and connector and detected no obvious faults. With the ignition on and the engine off, used the multi-meter to check for the presence of voltage at the transmission output shaft speed sensor supply terminal on the automatic transmission control module and found voltage was not present. With the ignition on and the engine off, used the multi-meter to check for the presence of voltage and ground at the automatic transmission control module connector and found both were present. Disconnected the automatic transmission control module connector, inspected the connector terminals and found no faults. The results of these tests verified the automatic transmission control module was faulty.
Replaced the automatic transmission control module, cleared codes, performed a road test and verified the vehicle operated properly. The check engine light did not illuminate and no fault codes returned.
SureTrack® adds to the power of ProDemand® with an exclusive combination of real-world knowledge and powerful diagnostic tools, all wrapped in an interactive community of professional technicians. Designed to help automotive shops increase accuracy and efficiency from diagnosis to completed repair, the industry’s most comprehensive repair information resource is just a few clicks away.
Want more? Here’s how you can see more Real Fixes in SureTrack: