SureTrack Real Fix: Get a Grip

Real Fixes from the SureTrack® expert information resource are documented issues from actual shop repair records and community discussions. Read on to see how SureTrack can help you correct issues that are not easily diagnosed using OEM information alone. SureTrack is available at no additional cost in our ProDemand product.


Remember when you pulled a lever, or stepped on a pedal to set the parking brake? Electronic parking brakes have proliferated through the automotive industry introducing another system to diagnose. SureTrack community member HHBA1 had a Mazda CX-5 that was setting parking brake codes and they were going down the path of replacing the module. They posed the question to the community, and with the help of fellow community member Markbob, and others, they were able to resolve the issue quickly.

The following Real Fix summarizes the interaction between them in the community that led to the solution.

Vehicle
2016 Mazda CX-5 Sport 2.5L

Title
Electronic parking brake sets codes, replaced caliper.

Complaint
Customer complains that parking brake is not working.

Diagnostic Steps Performed/Parts Replaced
Connected scan tool and found right rear actuator codes C2005 and C112a. Parking brake works a couple of times and then stops moving and sets these codes. Clear codes and it’ll work again for 1 or 2 tries and then stops working and sets codes again. Swapped parking brake actuator with a known good one and the problem remained the same. Dealer told customer to replace the battery with an AC Delco (not sure why). They replaced battery with a Duralast and then brought it to us. Customer stated that they were having the same problem. Thinking it needs an Electronic Parking Brake Module but was concerned with unknowns. Anyone have any experience with these same issues?

Best Answer from Community Member Markbob
Was your known good part a caliper and actuator, or just the actuator? The caliper itself can cause this code. You can get the caliper by itself with no actuator from Mazda. I would try that first, unless you can prove the module is bad.

Cause
Took off the actuator and manually turned the parking brake on the caliper, Found a stiff spot in the screw action.

Correction
Got new caliper and manually actuated the parking brake and found it worked as it should. Installed new caliper on vehicle and tested parking brake system and it functions as it should, and does not set the codes..


SureTrack® adds to the power of ProDemand® with an exclusive combination of real-world knowledge and powerful diagnostic tools, all wrapped in an interactive community of professional technicians. Designed to help automotive shops increase accuracy and efficiency from diagnosis to completed repair, the industry’s most comprehensive repair information resource is just a few clicks away.

Want more? Here’s how you can see more Real Fixes in SureTrack:

About the Author

Nick Taylor

Nick Taylor is the SureTrack Community Administrator and a Senior Applications Specialist at Mitchell 1 with over 25 years of experience with electronic repair data systems. Nick previously worked in the automotive dismantling and engine rebuilding industries.