SureTrack Community Fix: Panic Works for Once

Real Fixes from Mitchell 1’s SureTrack® expert information resource are documented issues from actual shop repair orders and community discussions. Read on to see how SureTrack can help you correct issues that are not easily diagnosed using OEM information alone. SureTrack is available at no additional cost in our ProDemand product.


Sometimes it takes an unusual procedure to get the job done, especially when you can’t find any other solution. SureTrack community member erick01 had a Chevrolet S10 pickup in the shop with a soft brake pedal and after several bleedings, the pedal would still go to the floor. They posed the question to the community, and with the help of fellow community member ironnutz, and others, they were able to resolve the issue quickly.

The following Community Fix summarizes the interaction between members of the community that led to the solution.

Vehicle
1996 Chevrolet S10 Pickup 4.3L

Title
Soft brake pedal with engine running. Repeat bleeding procedure.

Complaint
Firm brake pedal with engine off. Pedal slowly drifts to floor with engine running. With engine running, the rear chamber of the master cylinder bubbles constantly while brake pedal is being pushed.

Diagnostic Steps Performed/Parts Replaced
Installed two new master cylinders. Brake booster is fine. Blocked the lines off after the equalizer and before the abs unit and the pedal stays firm. There is no way to energize the ABS unit with my scanner because it is an early production 1996 model. Module mounted on coolant tank. Bleeding brakes in sequence and there are no leaks. Have run 3 large bottles of brake fluid through it and there is no air in the lines. Need way to energize the ABS unit to help with the bleeding.

Best Answer from Community Member ironnutz
Do some panic stops in gravel to get the ABS to activate, then bleed again. Sounds more like a booster issue. Pinch off the vacuum hose to the booster, start it up and see if the pedal still fades.

Cause
Air trapped in ABS system preventing complete bleeding.

Correction
Tried suggested panic stops and then bleeding system until problem was corrected. Booster was not at fault.


SureTrack® adds to the power of ProDemand® with an exclusive combination of real-world knowledge and powerful diagnostic tools, all wrapped in an interactive community of professional technicians. Designed to help automotive shops increase accuracy and efficiency from diagnosis to completed repair, the industry’s most comprehensive repair information resource is just a few clicks away.

Want more? Here’s how you can see more Real Fixes in SureTrack:

About the Author

Nick Taylor

Nick Taylor is the SureTrack Community Administrator and a Senior Applications Specialist at Mitchell 1 with over 25 years of experience with electronic repair data systems. Nick previously worked in the automotive dismantling and engine rebuilding industries.