Home » Categories » 08. ProPack Modules

Report Pro: Add Logo To Invoice

REPORT PRO

Add Logo To Invoice

For best results, image should be created from a graphics software. If created using Raster graphics (pixels) the logo should be generated for the specific size from the software. If created using Vector software (paths) the image can be resized with little effect on the quality.

Image size should be 2 inches wide by 1 inch high

Setting is per computer. Place the image in a shared network drive mapped as same folder path on every machine or place the logo in the same folder path on each machine.

1. From Report Pro

2. Click the Customize tab

3. Click the Customize Invoice button

4. Check the box Use Logo On Invoice

5. Click the lookup button

6. Open the folder that contains your shop logo

7. Select your logo in the folder

8. Click the open button

9. Click the Save button

0 (0)
Article Rating (No Votes)
Rate this article
  • Icon PDFExport to PDF
  • Icon MS-WordExport to MS Word
Attachments Attachments
There are no attachments for this article.
Comments Comments
Related Articles RSS Feed
Lube Sticker Pro: Automatically Add Next Oil Change Appointment
Viewed 4336 times since Tue, Jan 15, 2013
Lube Sticker Pro: Select Lube Sticker Printer
Viewed 9051 times since Tue, Jan 15, 2013
Report Pro: Configure Email Settings
Viewed 3452 times since Tue, Jan 15, 2013
ProPack Lube Sticker Printers
Viewed 8757 times since Tue, May 29, 2012
Report Pro: Customizing Multi Point Inspections
Viewed 54402 times since Tue, Jan 15, 2013
Report Pro: Quickly Print A Tech Worksheet
Viewed 3563 times since Tue, Jan 15, 2013
Message Manager Pro: Send A Text Message
Viewed 29034 times since Tue, Jan 15, 2013
Lube Sticker Pro: Customizing Oil Change Intervals
Viewed 7338 times since Tue, Jan 15, 2013
Message Manager Pro: Send Auto Reminder Text Messages For Appointments
Viewed 6601 times since Tue, Jan 15, 2013
Report Pro: Quickly Print An Invoice
Viewed 2470 times since Tue, Jan 15, 2013